Scheduling the Scanner for Monitoring Devices

Once the installation is complete, you can schedule the scanner and start the scanner to scan the devices. You can also set up monitoring mode and drop the agents detected by the scanner. This helps to organize and ensure consistent monitoring across all associated devices. 

1.  Navigate to Settings > Configurations > Scanner. 

The Scanner page is displayed.

2. Enter the Active Directory (AD) username for Ceburu's scanner to authenticate in the Username field.

3. Enter the password for the AD user to enable Ceburu's scanner access in the Password field.

4. Enable the ADDS Installation toggle button to allow the Active Directory Domain Service integration within Ceburu.

Note:  If the ADDS Installation toggle button is enabled, enter the AD server IP address in the AD Server field and the name of the domain in the Domain Name field.

5. Click Save Credential.

The credentials are saved.

6. Schedule the time for Ceburu's scanner to perform device scans in the Device Scan field.

7. Click Save Schedule.

The schedule is saved.

8. Select the mode for Ceburu's scanner from the Monitoring Status options.  The available options are AUTO and MANUAL.

9. Click Set Monitoring Type.

The scanner is now set up and monitoring of devices starts based on your schedule.